Description
- LDRobot DTOF LiDAR STL-27L
- Ranging Distance: 0.03 - 25m
- Ranging Frequency: 21600Hz
- Scanning Frequency: 10Hz
- Ranging Average Accuracy: ± 30 mm
- Scanning Angle: 360°
- Lifetime: 10000 Hours
The LDRobot DTOF LiDAR STL-27L utilizes cutting-edge TOF (Time-Of-Flight) ranging technology, employing laser pulses to measure distance based on time-of-flight. This advanced mechanism enables precise measurements with a maximum range of 25m, meeting the demands of various commercial applications. With an impressive measurement accuracy of ±20 mm within an effective detection distance of 8m, it facilitates efficient 360° detection for robots, autonomous mapping, and obstacle detection.
The device supports start-stop control via software, offering open-source access to demo materials and schematic diagrams for personalized development and operation control. Its stable performance is ensured by a coaxial brushless motor, providing quiet operation without friction and supporting high-speed wireless data transmission. With a remarkable lifespan exceeding 10000 hours, it meets project requirements for low failure rates.
- 1x LDRobot DTOF LiDAR STL-27L
PDF File
- Ranging distance: 0.03 to 25.00 meters (target surface reflectivity is 80.6%)
- Scanning frequency: 10 Hz
- Scanning angle: 360°
- Ranging frequency: 21600 Hz
- Angular resolution: 0.167°
- Wavelength: 895 to 915 nanometers (typical 905 nm)
- Communication interface: UART at 921600 baud rate
- Ambient light tolerance: 60 kilolux
- Power supply: 4.5 to 5 volts (typical 5V)
- Power consumption: 1.45 watts
- Operating current: 290 milliamperes
- Operating temperature: -10°C to 50°C
- Lifetime: 10,000+ hours