- Winter warm clothes for short-haired dogsHitec D955TW 32bit HighTorque HV Titanium Gear Servo

Title Default Title
Qty:

Description

  • Hitec D955TW 32bit HighTorque HV Titanium Gear Servo
  • Programmable PWM Digital Amplifier
  • 32-Bit MCU with 12-Bit ADC Circuitry
  • 4096 Resolution / 1M Cycle Potentiometer
  • Wide Operating Voltage (4.8 ~ 8.4 Volts DC)
  • 25-Tooth Output Spline / Coreless Metal Brush Motors

The Hitec D955TW 32bit HighTorque HV Titanium Gear Servo its a technologically-advanced servo powered by the 32-bit MCU and 12-bit ADC industrial science and possess Smart Sense engineering with a rapid, high-resolution response.

Its unprecedented programmability and wide-voltage capabilities deliver the most progressive, leading-edge performance for all your radio control needs. The reliably-strong titanium-geared D955TW replaces the well-known HS-7955TH.

  • 1 x Hitec D955TW 32bit HighTorque HV Titanium Gear Servo

Hitec D955TW 32bit HighTorque HV Titanium Gear Servo

  • 1.57" x 0.78" x 1.46" (40.0 mm x 20.0 mm x 37.0 mm)
  • Programmable PWM Digital Amplifier
  • 32-Bit MCU with 12-Bit ADC Circuitry
  • 4096 Resolution
  • 1M Cycle Long Life Potentiometer
  • Wide Operating Voltage (4.8 ~ 8.4 Volts DC)
  • Dual Ball Bearing Supported Output Shaft
  • 25-Tooth Output Spline
  • Coreless Metal Brush Motors
  • Nylon Reinforced Plastic Upper and Lower Case
  • Diamond Cut Aluminum Heat Sink Center Case
  • Dust Resistant and Splash Proof Case
  • Product Weight: 2.33 oz (66.0 g)
  • Output Shaft Style: 25 tooth (H25T) spline
  • Voltage Range: 4.8 V - 7.4 V
  • No-Load Speed (4.8V): 0.19 sec/60°
  • No-Load Speed (7.4V): 0.12 sec/60°
  • Stall Torque (4.8V): 251 oz-in. (18.07 kg.cm)
  • Stall Torque (7.4V): 404 oz-in. (29.09 kg.cm)
  • Max PWM Signal Range (Standard): 850-2350 μsec
  • Travel per µs (out of box): .097°/μsec
  • Travel per µsec (reprogrammed): 0.132°/μsec
  • Max Travel (out of box): 146°
  • Max Travel (reprogrammed): 198°
  • Pulse Amplitude: 3-5 V
  • Operating Temperature: -20°C to +60°C
  • Continuous Rotation Modifiable: Yes
  • Direction w/ Increasing PWM Signal: Clockwise
  • Deadband Width: 1 µs
  • Motor Type: Coreless Metal Brush
  • Feedback Style: 5KΩ Potentiometer
  • Output Shaft Support: Dual Ball Bearing
  • Gear Type: Straight Cut Spur
  • Gear Material: Titanium
  • Wire Length: 13" (330.2 mm)
  • Wire Gauge: 20 AWG